Steam Shower and Sauna
Where does the water and electricity connect at the back of the shower?
    Water is connected to the shower at the diverter. The diverter is positioned approximately 1250mm off the floor (this can vary a little depending on model type). The unit comes supplied with hoses of approximately 950mm length for both hot and cold water supplies.
The 13a power supply is typically from under the base and has a cable approximately 1700mm in length.
A secondary power supply is required for whirlpool models. Please refr to the specification of the models for location.

All power supplies for items fitted into bathroom and other 'wet' room location MUST be installed in accordance with current Legislation. For shower products this should be made via an isolated fused spur.

A Part P Qualified Electrician may be required to carry our work.